These T-Bolts are designed for the Ryobi BT3000 and BT3100 series Table saws, and work with the same function as T-Nuts, only with a fixed stud attached so you won't risk damaging the aluminum rail by turning a threaded stud into it.

Use these T-Bolts with any of the appropriately sized and matching threaded Knobs or Adjustable Levers that are also available.

These 5/16-18 T-Bolts are assembled with the Large T-Nut and is designed for use in the same slots as the Large T-Nut.

See the Specs page for where these are used and the dimensions available.
See the Notes page for information regarding the useful and actual lengths of T-Bolts.

Choose the length of T-Bolt you want from the list, and change the quantity to the desired amount before clicking "Add To Cart."

The actual threaded length (useful length) is the measurement from the inside face of the T-Bolt to the end of the threads.

The useful thread length is approximately 1/4" less than the length indicated, and must be considered when choosing the length. The length shown in the options is the full length of the T-Bolt including the thickness of the T-Nut.

Remember to choose a T-Bolt thread length that is at least 1/4" longer than the thickness of the attached item, unless you plan to use countersunk attachment methods.

Choose the length of T-Bolt you want from the list, and change the quantity to the desired amount before clicking "Add To Cart."